Home | Top News | World | US News | Politics | Economy | Sports | Technology | Science | Lifestyle | People | Recalls

Troubleshooting of Mars InSight instrument continues


WASHINGTON — Engineers are continuing to work to free an instrument on NASA’s InSight Mars lander that remains stuck just below the surface. The Heat Flow and Physical Properties Probe (HP3), one of the two main instruments on the spacecraft, features a probe, or “mole,” designed to hammer its way into the surface to a depth of about five meters. Once in place, it will measure how much heat is flowing out of the planet’s interior. The instrument, placed on the surface weeks after the spacecraft’s landing last November, started the hammering process in late February, but project scientists stopped that work days later when it appeared the mole was stuck about 30 centimeters below the surface. Engineers have since been trying to determine why the mole is stuck and how to get it moving again. The instrument team identified three potential causes for the mole becoming stuck. The mole may have hit a rock that blocks its progress. The tether trailing behind the mole could be stuck in the instrument’s support structure. Another possibility is that the mole’s hull doesn’t have enough friction with the surrounding regolith to keep it from rebounding when fires its hammer. That third explanation now appears to be the most likely one. “We’ve already moved one rock away,” noted Pascale Ehrenfreund, chair of the executive board of the German space agency DLR, during a panel discussion about the mission May 14 at the Humans to Mars Summit here. DLR developed the instrument for the InSight mission. She said it also appeared unlikely that the tether was tangled within the instrument. “It looks like that it’s actually the hull friction that is limited.” Tilman Spohn, the principal investigator for the instrument, wrote in a May 6 blog post that data collected by InSight’s other main instrument, a seismometer, showed that the mole’s response to the hammering was between that of one bouncing freely and one progressing normally into the surface. He wrote previously that a lack of friction could be caused by a “duricrust” of regolith at the surface that has a higher cohesion than layers beneath. “If the mole is sitting in the duricrust, its hull may very well have lost friction and upon time, the mole may have widened the hole in the duricust,” he wrote. Ehrenfreund said the instrument performed some “diagnostic hammering” in the last few days, but that the results of that latest effort was still being analyzed. She remained optimistic that the mole would be able to get to its desired depth. “All the tests have shown that HP3 is really healthy and operative. We just have to optimize to hammer further down,” she said. InSight’s seismometer has been free of technical issues, but has encountered a different problem: a lack of seismic activity. “It turns out that Mars indeed is, so far, extremely quiet,” said Robert Fogel, InSight program scientist at NASA Headquarters, on the same panel. The instrument has detected six seismic events to date, he said, including one “just the other day.” One of them is a likely Marsquake, but a weak one: an estimated magnitude of 2.5 about 150 kilometers from the landing site. A notable aspect of that quake, he said, is that the train of waves lasted 12 minutes, far longer than any terrestrial earthquake but similar to quakes detected by seismometers on the moon placed there by the Apollo missions. That can be explained if the Martian crust is very shattered, scattering waves and elongating the wave train, he explained. It also suggests that the crust is very dry, since water would “heal” shattered minerals. Fogel said that despite the limited number of quakes, they still hope to detect stronger events, with magnitudes greater than four. “It’s what we need in order for us to help determine exactly how Mars is stratified: core, mantle and crust,” he said. SpaceNews.com (SpaceNews.com) More More

Similar stories

As quantum technology matures what industries should care? - physicsworld.com

As quantum technology matures what industries should care?  physicsworld.com

“In the next 5-10 years a quantum computer will do a calculation that a supercomputer can't do,” Rupesh Srivistava told around 65 invited attendees at the ...

Posted on 23 May 2019 | 8:28 pm | Google News

Troubleshooting of Mars InSight instrument continues - SpaceNews

Troubleshooting of Mars InSight instrument continues  SpaceNews

Engineers are continuing to work to free an instrument on NASA's InSight Mars lander that remains stuck just below the surface.

Posted on 15 May 2019 | 2:00 am | Google News

10 Smart Building Technologies for Facilities Automation - Nanalyze

10 Smart Building Technologies for Facilities Automation  Nanalyze

Smart building technologies are helping smart cities move into the future by becoming more efficient in energy use and space utilization.

Posted on 29 April 2019 | 2:00 am | Google News

InSight lander detects first likely 'quake' on Mars - Spaceflight Now

InSight lander detects first likely 'quake' on Mars  Spaceflight Now

Sensors delivered to Mars by NASA's InSight lander have detected the first signals suggesting seismic activity on the red planet, a major discovery that extends ...

Posted on 24 April 2019 | 2:00 am | Google News

Life on Mars? NASA InSight may help solve this mystery - The Weather Network

Life on Mars? NASA InSight may help solve this mystery  The Weather Network

Is there life on Mars? NASA's InSight lander may provide us with a key clue that could solve this mystery.

Posted on 15 April 2019 | 2:00 am | Google News

Curiosity drills into clay unit; InSight 'mole' tests continue - Astronomy Now Online

Curiosity drills into clay unit; InSight 'mole' tests continue  Astronomy Now Online

NASA's Curiosity Mars rover has finally started drilling into a clay-bearing unit on the lower slopes of Mount Sharp, collecting samples that formed in the ...

Posted on 13 April 2019 | 2:00 am | Google News

Copyright © 2019 LastMinuteStuff.com
Contact info